IGBT Driver core 1700V, 30A, 2 Channel ,Base of Drivers IGBT > 400A
The SKYPER 42 R IGBT driver core constitutes an interface between IGBT modules and the controller. This core is a half-bridge driver with the basic functions built-in for driving, potential separation and protection. The SKYPER 42 R was developed for systems in the power range of 1 to 8 MVA. When using Semikron IGBT driver cores an adapter board (RS 905-6059) is required between the IGBT module and the gate driver core.
Two output channels, Up to 50µC (micro Coulomb) gate charge, Integrated potential-free power supply, Short Pulse Suppression (SPS), Under Voltage Protection (UVP), Drive interlock (dead time) top / bottom (DT), Dynamic Short Circuit
Informazioni di base:
Marcatura del produttore | SKYPER42R |
Type of casing: | !_mod_! |
Caso: | SEMIDRIVER |
Configurazione: | !_low+high side_! |
Specifica: | !_2-channels_! |
RoHS | Sì |
REACH | !_ne_! |
NOVINKA | A |
Parametri elettrici:
Udc (URRM, UCEO, Umax) | 1700 [V] |
Idc max (Tc/Ta=25÷160°C) | 0.15 [A] |
Idc max (Tc/Ta=25°C) | 0.15 [A] |
Udc-sup.min (Min.Supply DC Voltage) | 14.4 [V] |
Udc-sup.max (Max.Supply DC Voltage) | 15.6 [V] |
Uisol (@25°C/1min/50Hz) | 4000 [V] |
UDC-OUT (off/min) | -8 [V] |
UDC-OUT (on/max) | 15 [V] |
IOUT puls (Log.1=ON) (TA=25°C) | 30 [A] |
IOUT puls (Log.0=OFF) (TA=25°C) | 30 [A] |
du/dt (critical rate of rise of on-state voltage) | 100000 [V/µs] |
Pd-bez chladiče (Ta=25÷75°C) | 4 [W] |
Input Logic Level (Ugs level) | 15V |
Ft (transition/operation frequency) (@Inom.) | 0.1 [MHz] |
Qg (Total Gate Charge) | 50000 [nC] |
Parametri termici e meccanici:
Tmin (temperatura minima di esercizio) | -40 [°C] |
Tmax (temperatura massima di esercizio) | 85 [°C] |
Imballo e peso:
Unità: | pezzi |
Peso: | 58.3 [g] |
Imballaggio: | 1 |